29
|
35
13 MACHINE LUBRICATION SCHEDULE
• During machine maintenance and its lubrication, it is necessary to observe the safety regulations.
LUBRICATION
POINT
INTERVAL
LUBRICANT
Pins
Daily, always before the work with the machine.
Plastic grease
Always after the end of works during machine storing.
Always before storing the machine (for a period,
when the machine will be stored without work).
Lubricant handling:
•
Protect yourselves against direct contact with oils by using gloves or protective creams.
•
Thoroughly wash oil spots on the skin using warm water and soap. Do not clean the skin
with petrol, engine diesel fuel or other solvents.
•
Oil is poisonous. If you swallowed the oil, immediately seek a physician.
•
Protect the lubricants against children.
Summary of Contents for DG3N
