38
User product database
1.
Shutting down
the application
2.
Product
-
Here I choose which motor I want to modify (motor
1,2,3,
or
Seed
/
Fertilizer
) according to the machine
configuration.
Rename
-
Here you can rename the product.
Type of product
-
For the engine, select the product type seed / solid fertilizer / liquid fertilizer / undefined.
Note
-
Here you can enter any note, for example MARGED.
Adapt
-
Here it is possible to set a percentage value by which the required dose value can be changed manually
during work.
Example:
1x press by 10 %, 2x press by 20 %
Gear ratio
-
If there is a gear behind the outlet shaft motor, it must be entered here. The motor shaft speed is entered
first and then the metering unit speed.
Example:
2 rev. motor / 1 rev. dispenser
Level alarm
Low / Empty
–
Only if two sensors are used one above the other for one dispenser.
Empty
–
In case of using one sensor for the dispenser.
Deactivate
–
To deactivate the dispenser sensor.
Deviation tolerance
-
For each motor, enter the deviation from the required dose above which an alarm should be triggered.
-
For a precision seed machine the deviation tolerance applies to each row.
-
The left value applies to the upward deviation and the right value to the downward deviation.
Touch
Basic
