B
C
A
Well-designed, quality tools and equipment
|
farmers
friend
llc
.com
CLASSIC
CLASSIC PRO
GOTHIC
GOTHIC PRO
UPGRADE
1.
Attach spring wire channel to the top of your tunnel.
For Classic tunnels, start your top spring wire channel
approximately 11/2" below the bow joint and work your way
over the top of the tunnel. For Gothic tunnels, start channel
approximately 3" above bow joint. (Clamps can help to
hold channel in place)
2.
Fasten channel every 12-18 inches with self-tapping
screw. Be careful not to over-torque the screws or you
Be careful not to over-torque the screws or you
will strip out the bows.
will strip out the bows.
3.
Repeat until desired amount of channel is used. We
recommend using at least one channel per end. Side
ventilation will be incrementally restricted when using two
or more channels. Spring wire can be removed to increase
ventilation, however, repeated installing and removing
however, repeated installing and removing
of wire will wear out plastic.
of wire will wear out plastic. End walls can assist with
ventilation.
4.
Install spring wire into the channel after plastic is pulled
after plastic is pulled
over the tunnel
over the tunnel. First insert the end and then wiggle the
wire back and forth while seating into the channel.
tools needed
•
Ladder
•
Marker
•
Tape Measure
•
Clamps (Optional)
•
Drill or Impact Driver
•
5/16" Driver Bit
materials included
A
Self-Tapping Screws
B
Spring Wire Channel
C
Spring Wire
S T R U C T U R E & S U P P O R T
Spring Wire
Watch the video!
Scan the code or viSit:
fflc.us/spring-wire/v
Step 1
Step 4.1
Step 2
Step 4.2
20
21
