FarmChem APX DPM10G, Manual, Page: 8 / 16

FarmChem | www.FarmChem.com
8
B-3 User Mode
If the meter is off, press RESET to restart
it.
The value is last amount dispensed, the
meter will display:
To select a new PRESET value (for ex -
ample, 12.3), press the numeric keys as
many times as needed; this value will
be last mode automatically.
The meter displays:
Select value
Press OK/STOP and hold until the count -
er turns to zero.
Reset batch total
Selected value
To start dispensing, pull the trigger
completely, then release. The flow
automatically stops when the preset
value is reached.
NOTE: If you want to stop dispensing
before the preset value is reached, just
press OK/STOP to stop.
B-4 Use The Trigger
Fig A: Pull the trigger completely to
start dispensing and the trigger will
lock. When the desired amount has
been pumped, press OK/STOP to re -
lease the trigger and stop the flow.
Fig B: If there is only one indicator for
the battery left, you need to pull back
the trigger manually to stop the oil
dispensing
C. Preset Values Setting
C-1. Numeric Function
Press and hold OK/STOP to set the
function
Selective key
Numeric keys
Confirm and quit key
Press and hold on OK/STOP to set the
function: it contains value setting (C-2),
unit setting (C-3), decimal digits setting
(C-4), reset setting (C-5), auto reset set -
ting (C-6), and calibrating setting (C-7).