Farm King RP2, Operator And Parts Manual, Page: 27 / 64

Operation - RP2, RP4, RP5 Wheel Rake
25
IMPORTANT
Releasing the frame lock will allow the rake frame
to tilt upwards (against the springs) following the
profile of the terrain.
DO NOT operate rake without releasing the frame
lock.
Figure 7
Adjust the pressure of the rake wheels against
the terrain by adjusting the tension of the springs
(Item 1)
[Figure 7] .
Adjust the tension of the springs by moving the
spring mount (Item 2) to one of the three holes
(Item 3). Attach the mount using one M12 x 40 hex
bolt (Item 5) and M12 nut
[Figure 7]
.
At position (Item 3), spring tension is lessened and
rake wheels will exert greater pressure against the
terrain
[Figure 7]
.
At position (Item 4), spring tension is increased
and rake wheels will exert less pressure against
the terrain
[Figure 7] .
Use the tractor hydraulic lift to lower the rake until
the rake wheels slightly contact the ground.
Figure 6
Release the frame lock by using the locking device
underneath the hitch.
Remove the locking bracket (Item 1) and cotter pin
(Item 2)
[Figure 6] .
12 - 16 in.
(30 - 40 cm)
1
2
FRAME LOCKING
DEVICE
SPRINGS
EQUIPPED ON
RP4, 5 MODELS
2
5
4 3
1