Farm King ALLIED 9620, Operator And Parts Manual

Page: 9 / 30

9
Assembly Instructions - 9620 Snowblower
1. Bolt the quick hitch (F1530) to the snowblower body using two 1/2" x 1-1/4" hex bolts, lock
washers and hex nuts. Fasten to the lift arms using three 5/8" x 1-1/2" hex bolts on each lift
arm. Insert a 1" top link pin at the top and two 1-1/8" lift pins at the bottom of the hitch.
2. Hydraulic Gear Motor:
a) Assemble adaptors (812080) to manifold (909169), then bolt the manifold to the motor
(971518) using 5/16" socket head bolts (967249). Make sure o-rings are in place after disposable
protective shield is removed.
b) Mount the motor to the main body using 3/8" bolts and washers (86170, 81593). Ensure that
the manifold is on the side that points the adaptors to the right side of the snowblower.
c) Attach the gear spout ring (816355) to the bottom of the spout (816372) using 5/16" hardware
(812026, 81569, 81568). Ensure the smooth edge of the spout gear ring is on the left side of the
spout. Make sure bolts come through the bottom and the washer and nut are located on top.
d) Fasten the gear hub weldt (816435) to the motor using the 1/4" x 3/4" bolt (81525) and the
1-1/2" OD x 5/16" ID washer (813748) with the extended hub facing downwards.
e) Secure the gear guard cover (912571) above the motor using 5/16" hardware (812026, 81569,
81568).
f) Attach spout rotation hoses (816480) to manifold.
3. Mount the discharge spout (816599) using the spout, spacers and spout clamps (816618,
815574) bolted to the spout ring on the snowblower. Lubricate the spout ring and clamp. Make
sure bolts come through the top with a washer and a washer and nut are located on bottom.
Assembly Instructions