Farm King 1450, Operator And Parts Manual

Page: 16 / 74

16
Hydraulic Assembly
NOTE: Seal kits and service parts are only listed in the parts lists and are not indicated on the
illustrations.
Electrical Assembly
WARNING
Read and understand the safety messages listed in the bale
carrier operator manual. Shut off all power to unit before
inspecting, servicing, adjusting or repairing the bale carrier.
Prior to S/N BM1450R13000001 & S/N BM1450S13000033
WARNING
For proper operation of the snubber, power must be supplied
to the RED power wire from the control handle. Ensure that there
is a 15-amp fuse in place to protect this circuit. Verify prior to
installing snubber. Incorrect wiring will result in electrical failure.
NOTE: The snubber unit is designed to protect the momentary control switches. The snubber
minimizes coil voltage discharge during the de-energizing of the valve solenoid coils. There are no
serviceable parts within the unit. Ensure that all electrical connections are clean and dry. Test the
bale carrier and view to see if the hydraulic system is operating correctly. If any wires are damaged
or cut, the schematic on the next page will assist in repair and maintenance. All wire is 18 gage.
Assembly - 1450 Round Bale Carrier