Farm Fans FFI Silver King Series Operator'S Manual Download Page 2

2

Farm Fans warrants its products to be free of defects in
material and workmanship. The only obligation of the
manufacturer is to repair or replace products which
have been submitted and found to be defective within
24 months after installation. If so found defective, the
products will be repaired or replaced without charge,
this constituting and entirely fulfilling the warranty oblig-
ation. Farm Fans assumes no liability for expenses
incurred without written authorization; in no event shall
its liability include special or consequential damages or
exceed the selling price of the product.

This warranty does not cover products or parts which
have been damaged by negligent use, misuse, alter-
ation or accident. Some components supplied by man-

ufacturers are warranted separately by those suppliers.
This warranty is exclusive and in lieu of all other war-
ranties, expressed or implied. Farm Fans reserves the
right to make design or specification changes at any
time without any contingent obligation to purchasers of
products already sold.

All instructions, with the exception of those concerning
safety, shall be construed as recommendations only;
because of the many variable conditions in actual
installation, Farm Fans assumes no liability for results
arising from the use of such recommendations.

W A R R A N T Y

S A F E T Y   P R E C A U T I O N S

USE CAUTION IN THE OPERATION OF THIS
EQUIPMENT

The design and manufacture of this system is directed
toward operator safety. However, the very nature of any
system using high voltage electrical equipment and
rotation parts presents hazards to personnel which
cannot be completely safeguarded against without
interfering with efficient operation and reasonable
access to components. 

Use extreme caution when working around rotating
parts which may start without warning when the system
is operating on "Automatic" control.

Continued safe dependable operation of equipment
relies, to a great degree, upon the operator. For a safe
and dependable system, follow the recommendations
within this manual, make it a practice to regularly
inspect the operation of the system for any unsafe con-
ditions or developing problems.

TAKE SPECIAL NOTE OF THE OPERATING PRE-
CAUTIONS BELOW BEFORE ATTEMPTING TO

OPERATE THE SYSTEM.

CAUTION: Guards, access doors and covers must be
securely fastened before operating this equipment.

A CAREFUL OPERATOR IS THE BEST INSURANCE
AGAINST AN ACCIDENT.

Look for this symbol to point out important safety pre-
cautions. It means ATTENTION! 

1. Read and understand the operation manual before

attempting to operate the unit.

2. Keep ALL guards, access doors, covers, safety

decals and safety devices in place and securely fas-

tened. NEVER operate system while guards are
removed.

3. Keep all untrained personnel away from system com-

ponents and control panel at all times. 

4. NEVER attempt to operate the unit by jumping or oth-

erwise bypassing any safety devices.

5. Always open the main power supply disconnect

switch and lock it in the open position with a padlock
when performing any service or maintenance work on
the fan unit or control box.

6. Lock out power before removing guards, access

doors, and covers.

7. Keep hands, feet and clothing away from all rotating

parts.

8. Electrical repairs should be performed by trained qual-

ified personnel only. Failure to follow safe electrical
procedures can result in serious injury.

9. If it should become necessary to perform checks on

system components or high voltage tests with "live"
circuits, be extremely careful and follow all estab-
lished safety practices.

Copyright © 1998 by ffi Corporation. All rights reserved. No part of this publication may be used or reproduced in any form or by any
means without prior permission. Failure to comply with this notice is a violation of United States copyright laws.

Summary of Contents for FFI Silver King Series











Reviews: