DC/IN
NET
NET
1. Remove the Ethernet cable from the camera.
2. Press the WPS button on the IP camera.
3. Press the WPS button on the NAT/Router.
4. The blue LED on the IP camera will start blinking. If the blue LED
stops blinking and is always on in one minute, the wireless network
is connected successfully.
1
2
3
4
mCamView
3.4
CamView Software Usage
Wireless Setting of IP Cam - If router has WPS button
Wireless Setting of IP Cam - If no WPS on router
Step 3.
Step 4-1.
Step 4-2-1.
Step 4-2-2.
Camera List
Auto Search
001001001
001001002
001001003
001001004
Auto search
001001001
001001002
001001003
001001004
Auto Search
001001001
001001002
001001003
001001004
Auto Search
001001001
001001002
001001003
001001004
001001001
CamView
1.Execute the installed CamView software on the desktop or from “Start
→Programs→CamView→CamView”.
2.The “Auto Search” will display the IP camera in the local network.
3.Double click the camera and key in the password on the ID/password
card to see the video.
1
2
3
You can drag the camera on the “Auto Search” area to the “Camera List” area.
1
2
Camera List
You could also add new item on the “Camera List” area by “Camera List” →“New Camera”
→Key in camera ID and Password.
Please make sure the Ethernet cable is connected to the IP Cam !
!
1
2
3.1
1.Right click camera on the “Auto Search” area and click “Web Configure”.
2.Key in the admin account and password to enter the web configuration
page.
3. Four steps to setup the wireless connection:
3.1 Click the “WiFi Scan” button, all the available wireless AP will
be listed in 10 seconds.
The default admin account is “admin”, and no password.
Web Configure
WiFi Security Settings
3.1
WPA(2 )-P SK(WP A p erson al)
N o n e
W E P
Enable WiFi function
Disable WiFi function
SSID
Security mode
WEP Encryption
WPA Encryption
WPA-PSK Key
WEP Key
Save&Apply
WiFi scan
IP address
WiFi test
Auto Search
admin
Yes
Username(U):
Password(P):
Remember my password(R)
Cancel
Connect to 10.0.0.198
Wireless Setting of IP Cam - If no WPS on router
3.2
3.3
If scanning failed, please check the antenna or AP.
3.4. If the “WiFi test” succeeded, remove the Ethernet cable from the
IP camera to start the wireless connection.
Please do not remove the Ethernet cable during WiFi test.
The blue LED and red LED will be always on after wireless connection is successful.
WiFi Security Settings
Enable WiFi function
SSID
Security mode
WEP Encryption
WPA Encryption
WPA-PSK Key
WEP Key
Disable WiFi function
Save&Apply
IP address
WiFi test
WPA(2)-PSK(WPA personal)
None
TEST
12345678
WEP
TEST
54Mbps WPA
54Mbps WPA
54Mbps WPA
54Mbps WPA
54Mbps WPA
54Mbps WPA
NAS
dir615-11n
Fujikin
Luminlite
001601981C6C
OK
3.2 Choose the wireless AP and key in the encryption key.
3.3 Click “WiFi test” button and wait for 20~40 seconds to verify if the
encryption key is correct. If “WiFi test” failed, check “encryption key”
and repeat step 3.1 and step 3.2 again.
3.2
3.2
3.3
Step 5.
Software for iPhone/iPad and Android mobiles
Please search the software name “mCamView” on the App Store for
iPhone/iPad or on Android Market for Android mobiles.
More FAQs, please visit www.starvedia.com/FAQ01_list.html
Q1.What should I do if I forgot the password or the ID/Password card is missing?
Please press the “reset” button for five seconds. The IP camera will be reset
to the factory default settings. The default admin account is “admin”, and no
password. The default video-play password is “ipcam”.
Q2. How could I use IE browser to see the live video?
Please visit http://www.starvedia.com/live.html and key in the Cam ID and
password on the ID/Password card to see the live video.
Q3. What should I do if I cannot see the video remotely?
The red LED of the IP camera should be always on when the IP camera is
connected to the Internet. If the red LED is blinking, please double check the
network connection and settings again.
Q4. Where to download the latest CamView software?
Please download the latest CamView software with the following information :
Website: http://www.starvedia.com/download.html
Username: viewer
Password: camview
Warning
FAQs
WiFi scan
DC/IN
NET
NET
SD
WPS
SD
WPS
SD
WPS
Ethernet
Cable
(Wireless model)
(Wireless model)
(Wireless model)
This equipment has been tested and found to comply with limits for a Class B digital device ,pursuant to Part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in
residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause interference to radio or television equipment reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna -Move the equipment away from the receiver-Plug the equipment
into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/television technician for additional suggestions You are cautioned
that any change or modifications to the equipment not expressly approve by the party responsible for compli-
ance could void Your authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause undesired
operation.
For Mobile Device Usage
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Compliance Statement: