HOW TO RESET THE RADIATOR?
15
IF YOU RESET THE XANA PLUS RADIATOR MODEL ALL OF
THE CUSTOMISED PROGRAMMES THAT YOU MAY HAVE
STORED IN THE MEMORY WILL BE DELETED, AND WILL BE
REPLACED BY THE PRE-SET, EX-FACTORY DEFAULT
PROGRAMMES. IF YOU HAVE AN CENTRAL UNIT AND
THE RADIATOR IS CONFIGURED TO OPERATE BY WAY OF
SAME, AFTER RESETTING THE RADIATOR IT WILL HAVE TO
BE RE-INSTALLED AGAIN (CONSULT THE SECTION ENTITLED
“HOW TO INSTALL RADIATORS ON THE AUTOMATED
NETWORK” IN THE FARHO LIFE STATION CENTRAL UNIT
MANUAL).
Press the key.
Press the key ONCE, which will make the “ ”
indicator position itself in front of “Settings”.
Press the key.
Press the key TWICE, which will make the “ ”
indicator position itself in front of “Reset”.
Press the key.
The radiator will then request confirmation before
resetting. Press the and keys to select “YES” or
“NO”.
Press the key. If you chose “YES”, the radiator will
now be reset.
Go to the “Settings” menu and then to the “Reset” menu. The
radiator will ask you for confirmation. Use the ,
and keys to select and accept YES or NO, as
appropriate.
