4
To reset the MI Farho module to factory settings, press and keep pressed the
installation button (3) till the blue light (L4) turns on. Still keep pressed the
button untill the blue light (L4) turns off and the red light (L3) starts to blink.
After that release the installation button (3) and wait until the red light (L3)
stops blinking.
DO NOT TURN OFF the device until the red light stops blinking.
Reset to factory defaults
Go to the configuration menu of the control app and select “Communications”.
Press the “Set the time” button. The app will take the current time and date
from the control device and it will set it in the MI Farho module and the other
elements of the system.
Setting the time of the system
Go to the configuration menu of Farho-Control app in both control devices and
select “Communications”.
At the source device, the one that have the names of the zones, press “Send
data to another application” and at the receiver device press “Receive data
from another applicaton”.
To perform this operation, both control devices and the MI Farho module have
to be connected to the same router.
Sharing zone names between apps
At the “Configure” menu press “Add zone” to install in a new zone or “Edit
zone” to add modules to an existing zone. If you choose to install in a new
zone, you have to type a name for the zone, and if you choose to add modules
to an existing zone, you have to select the desired zone.
Once the zone has been created or selected, go near the module you have to
install. In the app press the button “Add modules”, the app will show a waiting
message, then press the installation button of the MC Farho module. The app
will increment the number of modules installed in that zone.
5
During the first 6 months after the purchase date, the guarantee covers the
repair at Farho installations of any manufacturing flaw or defect and any
damages arising of such defect.
During these 6 months, the client may also ask for a replacement free of
charge without having to run with the carriage charges and the labour costs
involved.
If the repair is not satisfactory for the client, the holder of the guarantee has
the right to have the item changed for a new one or even chose to return the
product and ask for a refund.
During the next 18 months, Farho will cover any replacement without any cost
for the client including carrier and labor costs.
After the second year, any electronic flaw can be repaired in Farho´s Technical
Service Department but carrier and labor costs will be charged to the client.
CAUSES EXCLUDED FROM GUARANTEE:
· Breaks provoked by atmospheric or geological phenomena (frosts, storms,
rains…) as well as those arising from inappropriate voltage.
· Parts or components that have received knocks or bumps during carriage or
the fitting operation.
· Cleaning operations of the appliance or parts of it provoked by dirt, grease or
other circumstances related to the premises where the appliance has been
fitted.
· Modifications to original Farho products without consulting the factory or
using spare parts that have not been recommended by Farho.
Warranty conditions
6
www.farho.com
Tlf. (+34) 985 51 40 82
Fax. (+34) 985 51 41 64
Pol. Industrial Tabaza II, parcelas 9 a 13
33439 Carreño, Asturias, SPAIN
© 2015 Farho Domotica S.L.
intelligent heating
Made in EU