Master ECG Wifi Configuration.
To control our ECGW emitter through the "Farho control" app, follow these steps:
1.
With the emitter turned off, press the button and turn on the emitter. On the screen,
you will see the following:
2.
After a few seconds, you will see the following: This means that
the emitter has generated a WiFi network to which we need to
connect from our mobile phone.
3.
From our mobile phone, we connect to that WiFi network. The
phone will redirect us to a page where we will need to enter
the name of our home WiFi network and its password to
connect our emitter to the WiFi network.
1.
Once this is done, on the screen, you will see the following: In this
menu, we have 4 options.
•
Update: Our emitter will check for firmware updates and update
to the latest version.
•
Set Master: It will become the master emitter of our installation,
through which we will connect with our "Farho Control" app and
the rest of the emitters.
•
Reset: We will reset our emitter.
•
Quit: We will exit BOOT MODE, and the emitter will start in normal mode.
