RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Firmware Upgrade Document (Rev. 1.3)
3
Table of Contents
Firmware Upgrade Instructions___________________________________ 3
Introduction __________________________________________________ 3
Requirements ________________________________________________ 3
Safety Messages (review carefully) _______________________________ 4
Downloading Firmware _________________________________________ 5
Placing the Printer in the Firmware Upgrade Mode __________________ 19
Sending the Firmware File _____________________________________ 21
Firmware Upgrade Instructions
Introduction
The DTC400/DTC300/DTC300M Card Printer/Encoders - Firmware Upgrade Document
(Rev. 1.3) provides step-by-step procedures for upgrading the Firmware on these
Printers.
Requirements
•
Windows 32 bit Operating System (XP/2000)
•
Internet
Access
