C50 Card Printer Service Manual PLT-01278 rev 1.1
August 2013
Page 38
HID GLOBAL CONFIDENTIAL AND/OR PROPRIETARY INFORMATION. This document contains confidential and/or proprietary information,
which may not be duplicated, published, disseminated or disclosed, or used for any purpose, without the written consent of HID Global
Corporation. If you are an unintended recipient of this information or are unwilling to accept the above restrictions, please immediately return
this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106..
3.10
Remove/Replace Encoder Sensor (A930514) for RFID Supply
Spindle/ Cable (D930605), Remove/Replace PCB board
(A000365-01)
NOTE:
For any other parts (motor/ encoder wheel) REPLACE COMPLETE ASSEMBLY
(D930015-01).
Step Procedure
1
Caution: Turn OFF the Printer and unplug the power cord from the Printer.
2
Remove Supply Spindle-RFID assembly. Refer to:
Remove/Replace Supply Spindle RFID Motor (D930015-01)
A000365-01
Tools needed:
Torx screwdriver and flat head
screwdriver
Estimated Repair Time:
30 min
Preparation:
Remove the Covers
Important:
This procedure can only be
performed by authorized service personnel.
RFID Cable D930603
Encoder Sensor Cable D930605
