RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
8-93
Using the Click and Drag capability
Click and drag the corners and the sides of an area to change size and location of area.
•
The Horizontal, Vertical size and X, Y coordinates update accordingly.
Click and drag the area to change the location.
•
The X, Y coordinates update accordingly.
Selecting “inches or mm” radio button
Select from the
inches
or
mm
radio button to change the measurement type. (
Note:
This is
similar to the choice on the Card tab.)
•
The
inches
radio button displays the area size and the location in inches.
•
The
mm
radio button displays the area size and the location in mm.
Using the Add and Delete buttons
Step Procedure
1 Use
the
Add
button for these capabilities:
•
Add an area default sized to .2 (.2 at location “0” with focus on the added
area).
•
Add multiple areas in the same location with the same affect (as if there
were only one area). (
Note:
Intersecting/overlapping areas do not
cancel each other out; instead, they act as one area.)
2 Using
the
Delete
button to delete the area with focus from the graphic.
