RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)
4-48
Resolving the Image Placement problems (continued)
Step Procedure
3
Verify if the
Horizontal Image Position Setting
is set correctly or incorrectly.
See the graphic below.
•
If the white border is on the leading edge of the card, adjust the
Horizontal value by +2.
•
If the white border is on the trailing edge of the card, adjust the Horizontal
value by -2.
a. Click on
OK
.
b. Run a self-test.
c. If the white border is diminished, continue the adjustment until it is gone.
Continued on the next page
Graphic A
