8
W
ITHOUT
C
OAX
*
W
ITH
C
OAX
(GB- '99)
PuntoVirgola series
*
M
ODY *
E
RRE
P/R
*
P
ROJECT *
P
UNTO
V
IRGOLA
*
S
LIM
PV2160. Two-colour flat tube monitor with
audio-video privacy, electronic microphone,
differentiated double electronic ringing sounds
(modulated and continuous note) and termi-
nal board for the connection to the wall-
bracket. With two buttons, one for control
switch ON and one for door lock release, and
5 supplementary buttons, that can be added
for additional services such as: control switch
ON, intercommunicating calls, stair lights,
door lock release, etc. The buttons are in-
cluded in the kit of the monitor. The maximum
acceptable current to the button terminals is
60mA. For higher currents use relay unit
art.1471.It can be installed on the wall (with
no built-in) by using the wall-bracket WB2100
or WB2160. For particular needs it is possi-
ble to separate the common of the buttons
labeled T4 and T5 by cutting the W1 jumper
on the wall-bracket. The buttons have the 2C
terminal in common. In this case the maxi-
mum acceptable current to the three buttons
is 0.5A.
PV2160W. This model has the same features
as the previous one, but with a white finish.
Technical data
Power Supply
18÷24Vdc
Operating current
0.35A
Video tube
4" FLAT CRT
Television standard
625 lines
Horizontal frequency
15625Hz
Vertical frequency
50Hz
Bandwidth
>5MHz
Video signal on 75
Ω
0.8÷1.5Vpp
Starting up time
2÷4 sec.
Operating temperature
0°÷+50°C
Max. permissible humidity
90%RH
Measures for the installation of the wall bracket WB2100
or WB2160 to the wall, and recommended height from the
floor.
Installation of the wall bracket WB2100 or WB2160 to the wall, by means of
expansion plugs.
Wall-brackets for the PV2160 and PV2160W monitors.
WB2100. The wall bracket includes a
terminal board for connection to the
system, it is to be used when installing
2 - button monitors (control switch-ON
and door lock release), with a one call.
Terminals
1
Video signal input 0.8÷1.5Vpp
2
General ground
3
Video ground
4
Control switch ON - button
8
Positive power supply output for video
floor distributors 12Vdc
9
Door lock release - button
10 Call from the door station (180mA)
11 Audio ground
12 Microphone output
13 Speaker and automatic cancel
14 Positive power supply input 18÷24Vdc
V
Not connected
WB2160. The wall bracket includes 2 termi-
nal boards for connection to the system, it is
to be used when installing monitors with extra
buttons and/or 2 differentiated bells.
Located on the wall-bracket terminal board is
a J1 jumper positioned for the intercommuni-
cating service (position A).
By using the PV2160 and PV2160W monitors
with multi-way systems without the intercom-
municating service, the audio privacy can be
restored by positioning the jumper J1 in B.
Terminals
The terminals from 1 to 14 have the same func-
tions and characteristics as the previous model.
V
Activation input for digital systems
X1 AC power supply input 13Vac-0.35A
X2 Intercommunicating call input (ground com-
mand)
1C Common for T1, T2 and T3 buttons
2C Common for T4 and T5 buttons
T1÷T5 Service buttons - max 60mA
P1
Not connected
MONITORS