Mi 2453
Gb - 9 -
Operating functions
The switchboard can operate in the following operating mode:
OFF, ON and Direct Call.
Switchboard OFF (night)
Switchboard is not operative while the other devices of the
system still continue to work as intended. All the call directed
to the switchboard will be lost.
Switchboard ON (day)
All the call either originated by the door stations or by internal
users are intercepted by the switchboard except those made
by the secondary door stations which can be managed by a
secondary switchboard (if present in the installation).
Direct Call
Enabling this function all the call originated by the door
stations are diverted directly to the internal users without being
intercepted by the switchboard. Switchboard will handle only
the
call from internal user
s and is able to
manage bookings
and
make an inclusions
to a communication in progress.
Operating instructions
Power-OFF
Keep pressed the
button until the switchboard switches
OFF or when the “device manager” menu appears select
power “OFF” and then press
. Already stored bookings
will not be lost.
Power-ON
Keep pressed the button
for some seconds, the switch-
board powers ON and starts to operate according to the
previous settings.
Device manager
When the switchboard is ON, pressing shortly the button
to display the “Device Manager” menu; in the menu are
listed the following functions: Power-OFF, keypad lock, ringer
tones OFF, ringer tones ON and software release.
Keypad lock
Activating this function, the keypad of the switchboard is
locked, it is only possible answer to the incoming calls from
door stations or internal users. In “Device Manager” menu
select “keypad lock” and press
; on the display will
appear . To unlock the keypad press for several seconds
the button
.
Ringer tones OFF and ON
To set OFF (or ON) all the ringer tones of the switchboard it is
necessary: - access the menu “Device Manager” by pressing
shortly the button
- select “Silent” - press
; LED
will light-ON. To activate again the ringer tones select “Ringer
ON” and press
; LED
switches-OFF.
Release Software
To display the software release of the switchboard select
“release” and press
. To exit this page press
.
Operating Modes
Enable Direct Call
To enable the Direct Call function it is necessary: press
- select “Mode” - press
- select “Direct dialling” - press
; LED
will light-ON showing that the Direct Call
function has been activated
Note:
in case of power failure or switching-OFF the
switchboard, the function
Direct Call
remains stored and
will be activated again at the next power-ON.
Back to the operating mode “DAY”
To disable the Direct Call function and operate in “DAY” mode
it is necessary: - press
- select “Mode” – press
- select “Normal” - press
; LED
switches-OFF.
- OFF
Keypad lock
Silent
Device Manager
A
J
T
G
P
W
D
M
B
K
U
H
Q
X
E
N
C
L
V
I
R
Y
S
Z
F
O
1
4
7
2
5
8
0
3
6
9
OFF
Silent
- Keypad lock
Device Manager
21.09.11
11.06
Linea libera
A
J
T
G
P
W
D
M
B
K
U
H
Q
X
E
N
C
L
V
I
R
Y
S
Z
F
O
1
4
7
2
5
8
0
3
6
9
21.09.11
11.06
Linea libera
OFF
-
Silent
Keypad lock
Device Manager
Keypad lock
Silent
- Ringer ON
Device Manager
Back
Normal
- Direct dialling
Mode
Door Stations
Booking
-
Mode
Menu
Back
Direct dialling
- Normal
Mode
Door Stations
Booking
-
Mode
Menu