Farenheit TID-893T Owner'S Manual Download Page 9

 

 

 

4. AS/PS Button 

In Tuner mode, select an available BAND, then press the button for longer than 2 seconds to 
enable the Auto Search and store function.  The unit will search for stations of the selected 
frequency band and will store up to 6 stations into the preset memory.  The search will stop 
automatically when the whole frequency spectrum has been search or when all the preset 
memory stations are used or when the AS/PS button is pressed again;  PS:  press the button 
shortly in the TUNER mode to scan the preset stations in the memory of the current selected 
frequency band. Each preset station will be heard for 5 seconds. Press the button to stop the 
Preset scan. 

5.   Button/

 Button

 

In RADIO mode, press to start automatic searching, press  and hold for two seconds to start 
manual searching, then press to tune each frequency step downward. 
In DVD / SD / USB mode, press   button to skip to the previous track. Press   button and hold 
for two seconds to activate fast reverse (REW) search in a track. 
In Bluetooth mode, press to make a call after inputted a phone number or accept an incoming 
call. 

6. VOL Knob / POWER Button 

VOL Knob: 

Adjust the volume level  by turning the knob clockwise to increase or 

counterclockwise to decrease. 

 

POWER: 

Press it to turn on the unit. Press and hold for 2 seconds to turn the unit off. 

 (* Press any button to turn on the unit except  REL  button  and EJECT button on panel, and 
EJECT button on remote control)

  

 

DUAL KEY setting:

 Long press it to choose C-DUAL/D-DUAL (Buttons on panel and RC control radio 

only), D-DUAL (Buttons on panel and RC control DVD only) 

7. BAND/TILT Button 

In Radio mode, press to change radio band in sequence of  FM1 

→ FM2 → FM3 → 

AM1 

→ 

AM2.  
Press and hold for 2 second to adjust the Monitor tilt angle: TILT ANGLE 1 => TILT ANGLE 2 
=> TILT ANGLE 3 => TILT ANGLE 4. 

8.   Button/

 button 

In Radio mode, press to start automatic searching, press and hold for two seconds to start 
manual searching, then press them to tune each frequency step upward. 
In DVD / SD / USB mode, press   button to skip to the next track. Press   button and hold for 
two seconds to activate fast forward (FF) search in a track. 
In BLUETOOTH mode, press to reject a coming call or hang up while calling. 

9.   / PLAY / PAUSE / Button 

In Disc, USB, SD CARD mode, press it to pause / play. Press it again to resume playback; long 
press it to stop, Press it again to resume playback. 

10. SCAN button 

Press to scan each Radio Station for about 5 seconds. Press any button to stop this action. 

11. IR Sensor 

IR Remote control signal receiving window. Max distance is 6-8 meters, 45 angels. 

12. Info Display 

Information Display LCD when operation the unit. 

13. DISC slot 

14. AV-in Jack 

 Put the AV plug into the AV-IN jack which was marked on front panel. 

 

Summary of Contents for TID-893T





























Reviews: