Farenheit TI-712 Owner'S Manual Download Page 24

 

 

24

Press and hold

/

 or short press 

 button to enter audio control mode. Press any 

button (

/

) to quit this mode.

 

Music mode 

Press 

 or 

 button to play previous / next track. Press and hold   or 

 button to fast 

backward or forward. Press 

 button to play/pause the playback.   

Phone call mode 

When a phone call comes in, press anyone of the buttons (

/

), you can answer 

the phone call, press 

 button to reject the phone call.  

During a phone call, press any button (

/

) can hang up the phone call. 

 
Noted:

  

1

If the unit in other modes, it can’t switch to the smart control interface automatically when a 

phone call comes in. You must turn to the smart control interface manually, then press the 

 

button to answer the phone call. 
2

This function is just available for: iphone 3G/3GS/4/4S/5, ipod touch 3/4. 

 

[For SUMSUNG Mobile Phone] 

The smart control function is available for SUMSUNG mobile phone too. 

S Voice mode 

Press 

 button or long press 

 / 

 button to enter Google or S Voice for choice. When in S 

Voice mode, press   / 

 / 

/

 button to come back to music playing, but the phone still 

displays the audio control GUI; press 

 button also come back to music playing, the phone 

displays Google or S Voice choice page. 

Music mode 

Press 

 or 

 button to play next track. Press 

 button to play/pause the playback.   

Phone call mode 

When a phone call comes in, press anyone of the buttons (

/

), you can answer 

the phone call, press 

 button to reject the phone call.  

During a phone call, press any button (

/

) can hang up the phone call. 

 

Noted:

  

If the unit in other modes, it can’t switch to the smart control interface automatically when a 
phone call comes in. You must turn to the smart control interface manually, then press the 

 

button to answer the phone call. 
 
 

OTHER FUNCTIONS 

Subwoofer 

Connect the subwoofer to the unit using sub output (see electrical diagram). Tap MENU on 
screen enter into main menu setting choose setting menu. Choose SOUND and set subwoofer 
ON to enable subwoofer. 

Parking 

When the car is stopped and the parking brake is working, the screen can display the video 
image, otherwise the screen can't display the video image 

Back View Camera 

This unit is equipped with back view camera output. The camera is used to observe the 
situation behind the vehicle when you are backing the car. 
Please connect your back view camera with the back car video input. And connect the reverse 
wire for back a car with the rear gear light. Rear view camera picture will be enabled when you 
are backing the car. 

Summary of Contents for TI-712





























Reviews: