background image

 

 

 
WARNING!  
 

To promote safety, certain functions are disabled unless the parking brake is on. The Unit is 
designed to detect parked status and must be connected to the power supply side of the 
parking brake switch. Improper connection or use of his connection may violate applicable law 
and may result in serious injury or damage. To avoid the risk of damage and injury and the 
potential violation of applicable laws, this unit is not for use with a video screen that is visible to 
the driver.  

  To avoid the risk of accident and the potential violation of applicable laws, the front Video 

image feature should never be used while the vehicle is being driven. Also, other video 
displays should not be in  a location where it is a visible distraction to the driver. In some 
countries or states the viewing of images on a display inside a vehicle even by persons 
other than the driver may be illegal. Where such regulations apply, they must be obeyed 
and this unit’s DVD features should not be used.  

  Please remember to wear your seat belt at all times while operating your vehicle. If you are 

ever in an accident, your injuries can be considerably more severe if your seat belt is not 
properly buckled.  

  The supplier waves any and all liability when these warnings are not followed. 

 
OPERATION PRECAUTIONS  
 

  Only connect to a 12Vdc battery and negative grounding.  

  Avoid placing the product in direct sunlight, in areas with high levels of dust, high 

temperatures (over 40°C) or high humidity (over 90%). In case of high temperatures, cool 
down the car interior by means of ventilation or air-conditioning.  

  Operate in well ventilated areas.  

  Do not turn on or off the product in short intervals. When turning the unit off, wait for at least 

10 seconds prior to turning the unit on again. Do not operate the player with scratched, 
bended or broken discs and when a disc is not loaded properly, do not force it into the 
player. 

  Do not watch video playback while driving which will cause  serious danger and risks of 

traffic accident. It may violate the laws and regulations. 

(There may be exceptional case, i.e., using rear view camera and navigation system) 

  Do not install the unit where the operation for safety driving is restrained. 

  Do not disassembly the unit by yourself, if need repairing, please take the unit to the after 

service center. 

  Do not open and close the monitor manually, it may damage the monitor tilt system. 

  Do not touch the LCD screen by hard objects, it may damage or give scratch to the LCD 

screen. 

  If the back of monitor touches dashboard or air-conditioner inlet etc after open the monitor , 

then setup TILT level in monitor TILT menu to prevent damage from repeat touching. 

  Car parking under direct sunlight may increase the temperature inside the car and the unit 

may not be in proper operation, please try it again after the temperature returns to normal. 

  Do not replace the fuse on the power cable without professional guidance, using improper 

fuse may cause damage to the unit or even cause burn the unit. 

  Do not use irregular shaped Disk. 

  IR remote control operation may be hindered by monitor when the monitor is opened, thus 

please use the remote control at the similar level of remote control receiver. 

  Do not install the unit where the cooling fan is blocked.  

 

Summary of Contents for TI-710B



























Reviews: