17
Note:
Auto menu can not be set in memory function.
(2) If the procedure has been set, press
to use it. If not, continue to set
the procedure. Only one or two stages can be set.
(3) If the procedure has not been set, after finishing the setting, press
once to
save
the
procedure and turn back to the waiting states. If
you
press
“START/+ 30SEC“ it will start
cooking at once and save the procedure too.
Example: To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3minutes and 20 seconds
The steps are as follow:
a.
In waiting states, press “0/MEMORY” twice, stop pressing until the screen displays “2”.
b.
Press “ TIME
COOK “ once,then press “3”,”2”,”0” in order.
c.
Press “POWER“ once, ”PL10” display
s
, then press “8” and “PL8” displays.
d.
Press
“START/+ 30SEC“ once to save the setting. Buzzer sounds once then screen displays “2”.
P
ress
“START/+ 30SEC“ again, and the procedure will be operated as the memory 2.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the procedure
will
need to
be
reset.
f. When you want to run the saved procedure, in waiting states, press
twice, screen
“0/MEMORY”
“START/
+
30SE
C
“
displa
ys “2”, then press
“START/+ 30SEC“
to start cooking.
“START/
+
3 0SE
C
“
sounds five times and
then turns back to waiting state.
B.
BEEF MENU
Press
“MEAT“ twice to choose beef menu,“BEEF“ displays
Press
“START/+ 30SEC“ to confirm menu
,
12.0 displays
Keep pressing
“MEAT“ to choose beef weight 19.0, 26.0,
33.0 or 40.0 Oz
"
can be selected
7YLZZ¸:;(9;:,*¸[VJVVRI\aaLYZV\UKZVUJL>OLUJVVRPUNPZMPUPZOLKI\aaLY
18.
MEMORY FUNCTION
(1)
Press “0/MEMORY” to choose memory 1-3 procedure. The screen will display 1,2,3.
C
.
Pork
MENU
Press
“MEAT“ t
hree times
to choose
pork
menu,“
PO
“ displays
Press
“START/+ 30SEC“ to confirm menu
,
6
.0 displays
Keep pressing
“MEAT“ to choose
pork
weight
11
.0,
1
6.0,
21
.0 or
26
.0 Oz
"
can be selected
7YLZZ[VJVVRI\aaLYZV\UKZVUJL>OLUJVVRPUNPZMPUPZOLKI\aaLY
sounds five times and then turns
ba ck
to
waiting
state.