USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Any servicing
requiring disassembly must be performed by a qualified appliance
repair technician.
1. Unplug the Espresso Maker from the electrical outlet and allow to
cool completely before cleaning.
2. The Filter Basket Holder and Filter Basket(s) should be emptied
and rinsed thoroughly with warm water after every use.
If necessary, clean the Filter Basket(s) with a kitchen brush. A pin
may be used to clear any clogged holes. Dry thoroughly.
3. The Steam Nozzle separates for easy cleaning. (See Figure 7.)
Disassemble the Steam Nozzle by holding the 2 fins of the Steam
Nozzle in one hand and turning the Outer Tube counter-clockwise
and pulling it down to remove. Do the same for the Steam Inner
Tube. These can be rinsed or soaked in hot water to clean. If
necessary, use a pin to clear any blockage. Replace by turning
clockwise and fit into position.
4. To remove the Drip Tray, no cups must remain on the Drip Plate.
Remove the Filter Basket Holder from the machine. Remove the
Drip Plate and then the Drip Tray. Empty water, rinse, and replace.
5. Wipe the outside of your Espresso Maker with a damp cloth. Never
use solvents or any detergents that may scratch or damage the
surface of the machine.
6.
NEVER IMMERSE THE ESPRESSO MAKER IN WATER OR ANY
OTHER LIQUID.
12
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to
fit into a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.
SHORT CORD INSTRUCTIONS
A short power-supply cord is provided to reduce the risk resulting
from becoming entangled in or tripping over a longer cord.
Do not use an extension cord with this product.
PLASTICIZER WARNING
CAUTION:
To prevent Plasticizers from migrating from the
finish of the counter top or table top or other furniture, place
NON-PLASTIC
coasters or place mats between the appliance
and the finish of the counter top or table top.
Failure to do so may cause the finish to darken. Permanent
blemishes may occur or stains can appear.
ELECTRIC POWER
If the electrical circuit is overloaded with other appliances, your
appliance may not operate properly. It should be operated on a
separate electrical circuit from other appliances.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
REMOVE THE BOTTOM COVER. NO USER-SERVICEABLE PARTS
INSIDE. REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE
PERSONNEL ONLY.
3
FBW_FES15B_IB_25-5-06 5/25/06 4:17 PM Page 7
