17
18
GENERAL TIPS
•
Before cleaning or performing maintenance, always remove the plug.
•
After every wash, turn off the water supply to the appliance and leave the
door slightly ajar.
•
When not in use for a longtime - It is recommend that you run a wash cycle with
the dishwasher empty and then remove the plug from the socket, turn off the water
supply and leave the door of the appliance slightly open. This will help the door seals
to last longer and prevent odors.
•
Moving the appliance - If the appliance must be moved, try to keep it in the vertical
position.
•
Installation preparation - The installation position of dishwasher should be near the
existing water inlet tap. One side of the cabinet sink should be chosen to facilitate the
connection of drain hoses of the dishwasher.
•
Water connection - Connect the hot water supply hose to a threaded 3/4 (inch)
connector and make sure that it is fastened tightly in place. If the water pipes are new
or have not been used for an extended period of time, let the water run to make sure
that the water is clear and free of impurities. If this precaution is not taken, there is a
risk that the water inlet can get blocked and damage the appliance.
Please Note: If the supplied hose does not fit your tap, you may need to contact a
plumbing supply company for an adapter.
CONNECTION OF DRAIN HOSES
•
The drain hose must be correctly fitted to avoid water leaks. Ensure that the water
drain hose is not kinked or in any way impeded.
•
How to drain excess water from hoses - If the sink is higher than the surface where
you have placed your dishwasher it will be necessary to It will be necessary to drain
excess water in to a bucket that is lower than the dishwasher position.
•
If you need a drain hose extension, make sure to use a similar drain hose an no longer
than 12 feet otherwise the cleaning effect of the dishwasher could be reduced.
Fix drainage pipe with siphon cup
Rubber
Stopper
OR
3
3
1
2
FDW05ASBWHA_Manual_vF.indd 17-18
5/20/19 3:08 PM
