8
9
OPERATION
Fill the required amount of water into the carafe
•
(10)
. Pour the water into the
water tank
(5)
(ill.
f
). Check the water-level indicator
(5a)
in the inside of the
water tank
(5)
(ill.
g
).
Close the lid
•
(3)
(ill.
h
).
Place the carafe
•
(10)
on the keep warm plate
(9)
(ill.
h
).
NOTE:
Ensure the appliance is assembled correctly and completely.
NOTE:
It is possible to place a paper filter into the filter housing
(14)
instead of the
permanent filter
(15)
. Only use a filter of the cone type 1x2 (for 4-6 cups).
NOTE:
Do not place a paper filter in the permanent filter
(15)
, as water will not flow
freely through the permanent filter
(15)
.
Connect the plug
•
(6)
to a wall outlet (ill.
i
).
The appliance is now is stand-by mode. On the display
•
(19)
,
“12:00”
will flash
for about 5 seconds and then change to be displayed constantly. The display
backlight will be fully illuminated for about 30 seconds before dimming.
NOTE:
Pressing any button at any stage will cause the display backlight to switch to
full illumination for about 30 seconds before returning to being dimmed.
Setting the clock
NOTE:
Setting the clock is required to be able to use the
AUTO
function.
NOTE:
The appliance has a 12-hour display (-/PM).
Press and hold
•
HOUR (20)
or
MIN (18)
button for about 1 second to enter the
clock setting mode.
Press the
•
HOUR
button
(20)
to set the hours on the clock. Each press will advance
the clock by one hour.
Press the
•
MIN
button
(18)
to set the minutes on the clock. Each press will
advance the clock by one minute.
NOTE:
Press and hold either the
HOUR (20)
or
MIN (18)
button, to advance through
hours/minutes rapidly.
NOTE:
The clock will be reset if the appliance is unplugged from the wall outlet and
not reconnected within 15 seconds. The clock needs to be set again.
NOTE:
If no button is pressed for about 5 seconds, the set time will be saved and
the appliance returns to stand-by mode.
5-cup Coffee Maker_103743_IM_US_V2_121212.indd 9
12/12/12 3:53:20 PM