USE AND MAINTENANCE MANUAL - SECTION 4
STOCK PICKER ELEVAH 65-80 MOVE PICKING – Rev. 09_2019
Page 4-15
PARKING THE MACHINE
1. Drive the machine in a well-protected and ventilated area.
2. Make sure that the cage is completely lowered, turn the main switch
to OFF
NOTE:
if necessary, charge the batteries in preparation for the following
work day.
ATTENTION
PREVENT UNAUTHORISED USE BY SWITCHING THE MACHINE OFF AND
REMOVING THE KEY WHEN THE OVERHEAD STOCK PICKER IS NOT IN USE.
TRANSPORT AND LIFTING PROCEDURES
General information
It is possible to transport the Stock Picker to a work site using one of the
following methods:
By driving the machine along the route on its base wheels, if the surface
it is travelling on allows it.
By moving it with a Stock Picker
(see the figure below - check the
gross weight of the machine in the Operational Technical Data Table
for the machine).
ATTENTION
LOAD THE MACHINE, ONLY IN A VERTICAL POSITION, ONTO A HEAVY DUTY
VEHICLE HAVING A USEFUL LOAD CAPACITY ABLE TO SUPPORT THE
TOTAL WEIGHT OF THE MACHINE (CHECK THE GROSS WEIGHT OF THE
MACHINE IN THE OPERATIONAL TECHNICAL DATA TABLE OF THE MACHINE)