background image

2.5M

3M

 6.6M 

 5.6M 

 8M 

OBSERVATION AREA

2.5M Height - Detection area

3M Height - Detection area

OVERVIEW

MOTION SENSOR 360

FAR-M360-0-10V-LUX

The Faradite Motion Sensor 360 is 

a low profile passive infrared ceiling 

mounted motion sensor with an 

integrated 0-10V (0-1000 Lux) light 

sensor. It’s designed for use with 

home/building automation systems.

At 2.5M

 it gives a 5.6M * 6.6M 

detection area. 

At 3M

 it gives a ~8M diameter, as 

shown below.

The following conditions have to 

be met to detect motion:

1.Movement speed: 1.0m/s

2.Target concept is a human body

(Min object size: ~700×250mm)

3. The temperature difference 

between the target and the 

surroundings must be greater 

than 4 

°

C  when mounted at 5m 

TECHNICAL DATA

Power supply 

(consumption)

12V-24V DC @ 24V 

(3mA)

Motion output 

voltage

12V-24V DC

Max, motion 

output current

80ma

Lux range

0 Lux (0V) -

1000 Lux (10V) 

Ambient 

temperature

-15-50 

°

(Indoor Only)

IP Rating

IP20

Range 

(Note 1)

5m

Max mounting 

height

3m (For optimal 

performance)

Motion output 

timeout

1 second

Mounting hole

35mm

Dimensions

35mm hole-saw 

diameter  

49mm rim diameter 

c.35.5mm height

Push-fit 

connector

AWG 20- 24 CAT5 / 

CAT6 / CAT7

Standards

EN 61000-6-1

EN 61000-6-3

ELECTRICAL CONNECTIONS

It is recommended to use CAT cable 

to connect the motion sensor to the 

building automation system. 

1: Strip the cable back 6mm

2: Push into circular hole on the 

connector

3: To remove the wire insert the 

supplied tool or a small screwdriver 

in the slot behind the wire

4: The connector can be removed 

from the motion sensor by pulling it

EQUIVALENT CIRCUIT

MOTION OUTPUT

LUX OUTPUT

0V

10V

0 Lux 1000 Lux

OUTPUT 

TIMEOUT 

1 SECOND

0V

12V- 24V DC

-

    0V/GND

L

   LUX 0V - 10V 

+

  12V-24V DC

M

  MOTION

CLOSED DURING

 

MOTION

LUX 

SENSOR

Strip back

Push in

Remove

Pull to remove connector from motion sensor

X

Y

X

Y

X

FIRE RATING

The stand-alone Motion Sensor 360 

is not fire rated.

To achieve a 60 minute fire rating to 

BS 476: Part 21 1987, the optional 

Fire IDR must be fitted to the 

Motion Sensor 360.

The Fire IDR is an optional extra.

Y

X

Note 1: Please note that the specified range is 5m but under optimal conditions the sensor might detect movement at a much longer range

Reviews: