Identification of controls
FIGURE 1: Front and back of the SUPER3 power supply, controls and connections
1) Indicator LED. The front LED has several modes:
a) Solid blue: Power supply is ready, voltage present at output
b) Fading red: Power supply is charging supercapacitor banks at startup
c) Flashing red: Power supply error. Led flashes fast and then slowly with error code.
d) No LED. Power supply is disabled or in reset, or fuse broken
2)
DC output connector. We use a gold plated GX16-4 connector. Plus is
connected to pin 1 and 3 and minus to pin 2 and 4. This output delivers the rated voltage
(stated at position 4) at 3A maximum current continuously.
3)
Reset switch. This switch resets the power supplies microprocessor. After a reset the sup-
ply will start a new startup sequence. It can be used to reset the supplied device, or when
changing between differentdevices. Also when an error has occurred and the supply needs
restart. It is recommended to reset the power supply before each use.
4)
Rated output voltage. In this box the factory fixed output voltage is noted
5)
Heatsink. Heat sink for both of the regulators, please keep clear distance around it so air
can flow through it uninterrupted
6)
Main voltage indication. When noted “115”, the power supply is configured or 100-120Vac,
50-60Hz voltage range. If noted “230”, the power supply is configured for 220-230Vac/50-
60Hz mains voltage range
7)
Mains IEC connector. Place mains power cord at this connector. The power supply is opti-
mized such that lowest leakage current will be present when AC phase is applied to the (L)
pin of the connector
8)
Serial number. Always refer to this number in any communication with your dealer or Farad
power supplies directly.
IMPORTANT NOTE: Always switch off and mute devices when connecting or disconnecting the
Farad power supply.
When you have any questions about our power supplies, please contact us at info@Faradpower-
supplies.com with serial number stated at the back (see figure 1, position 8) of the power supply.
We will reply to you as soon as possible.
10
Summary of Contents for Super3
Page 1: ...Super3 Owner s manual...
