ENGLISH
ENGLISH
GB-39
GB-38
to supply you with the necessary fittings and
installation advice.
It is important not to connect the vent hose
to, for examples cooker hood, or a chimney or
flue pipe designed to carry the exhaust from a
fuel burning appliance.
Note that to avoid condensation problems, it is
essential that the dryer be fitted with the flexible
hose to carry its exhausted outside the kitchen.
In order to prevent the appliance from
overheating.it is important that the steam
exhaust is unobstructed.
If the dryer is fitted next to kitchen units, make
sure that the vent hose is not squashed.If the
hose is partially squashed, drying efficiency will
be reduced, resulting in longer drying times
and higher energy consumption.If the hose is
completely squashed,the safety cut-outs with
which the machine is fitted may operate.
Stacking kit
•
Electrical connection
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
THIS APPLIANCE
MUST BE
EARTHED.
Warning
The manufacturer declines any liability
should this safety measure not be observed.
Before switching on, make sure the electricity
supply voltage is the same as that indicated on
the appliance’s rating plate.
Should the plug need to be replaced for any
reason, proceed as described below.
The wires in the mains lead are coloured in
accordance with the following code:
• Green and Yellow-Earth
• Blue-Neutral
• Brown-Live
The wire coloured green and yellow must be
connected to the terminal marked with the letter
or by the earth symbol or coloured green and
yellow.
