ENGLISH
ENGLISH
GB-2
GB-3
GB-4
GB-5
before assembling,
disassembling orcleaning.
• Switch the appliance off and
disconnect from the mains before
changing the accessories or
making contact with moving
parts when being used.
• If the power cord is damaged, it
must be replaced by the
manufacturer, their after-sales
service or a qualified professional
in order to avoid any danger.
• Precautions must be taken when
handling sharp blades, when
emptying the bowl and cleaning.
• Never immerse the top section of
the blender in liquid as you risk
causing an electric shock.
• Unplug the power cable when not
using the appliance, before
adding or removing a moving
component, and before cleaning
the appliance.
• When mixing, there must be no utensils
in the container and no one must place
their hands inside. This is to reduce the
risk of serious injury to persons and
damage to the appliance. You can use a
scraper, but only use when the blender has
been switched off.
• Using accessories that are not recommended
by the manufacturer may cause injury to
persons.
• Only use the appliance for the purposes for
which it was designed.
• Never use it outdoors.
• Do not mix very hot or boiling food or liquids.
• Do not mix foods containing hard parts that
the blades may not be able to cut in complete
safety.
• Do NOT place the hand blender on or close to
a source of heat, or on top of an oven that is on.
• The length of time for each cycle of use
should not exceed 1 minute. The appliance
should be left to rest for 10 minutes between
each cycle.