ENGLISH
ENGLISH
GB-37
GB-36
2. Open the door a little.
3. After the spray arms stop working, you can
open the door completely.
4. Add forgotten dishes.
5. Close the door
6. Press the
Start/Pause
Button, the
dishwasher will run after 10 seconds.
At the End of the Wash Cycle
When the working cycle has finished, the buzzer
of the dishwasher will sound for 8 seconds, then
stop. Turn off the appliance using the Power
switch button, shut off the water supply and open
the door of the dishwasher.
Wait for a few minutes before unloading the
dishwasher to avoid handling the dishes and
utensils while they are still hot and more
susceptible to breakage. They will also dry better.
• Switch Off the Dishwasher
The program light is on but is not blinking, only
in this case the programme has ended.
1. Switch off the dishwasher by pressing the
On/Off
button.
2. Turn off the water tap!
• Open the door carefully.
Hot dishes are sensitive to knocks. The dishes
should therefore be allowed to cool down around
15 minutes before removing from the appliance.
Open the dishwasher’s door, leave it ajar and
wait a few minutes before removing the dishes.
In this way they will be cooler and the drying
will be improved.
• Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper
one. This will avoid water dripping from the
upper Basket onto the dishes in the lower one.
WARNING!
It is dangerous to open the door when washing,
because the hot water may scald you.
