ENGLISH
ENGLISH
GB-45
GB-44
Forgot to Add a Dish?
A forgotten dish can be added any time before
the detergent cup opens.
1. Open the door a little .
2. After the spray arms stop working, you can
open the door completely.
3. Add forgotten dishes.
4. Close the door
5. The dishwasher will start running again.
At the End of the Wash Cycle
When the working cycle has finished, the buzzer
of the dishwasher will sound for 8 seconds, then
stop. Turn off the appliance using the ON/OFF
button, shut off the water supply and open the
door of the dishwasher. Wait for a few minutes
before unloading the dishwasher to avoid
handling the dishes and utensils while they are
still hot and more susceptible to break. They will
also dry better.
•
Switching Off the Dishwasher
The program light is on but is not blinking,
only in this case has the program ended.
1. Open the door.Switch off the dishwasher by
pressing the ON/OFF button.
2. Turn off the water tap!
•
Open the door carefully.
Hot dishes are sensitive to shocks. The dishes
should cool down for around 15 minutes
before removing from the appliance.
Open the dishwasher's door, leave it ajar and
wait a few minutes before removing the dishes.
In this way they will be cooler and the drying
will be improved.
•
Unloading the dishwasher
It is normal for the dishwasher to be wet
inside.
Empty the lower basket first and then the
upper one. This will avoid water dripping from
the upper Basket onto the dishes in the lower
one.
WARNING!
It is dangerous to open the door when washing,
because the hot water may scald you.