ENGLISH
GB-52
Insure proper ground exists before use
Water Connection
Cold Water Connection
Connect the cold water supply hose
to a threaded 3/4(inch) connector
and make sure that it is fastened
tightly in place. If the water pipes
are new or have not been used
for an extended period of time,
let the water run to make sure
that the water is clear and free of impurities. If
this precaution is not taken, there is a risk that
the water inlet can get blocked and damage the
appliance.
Please Note: If the supplied hose does not fit your
tap, please contact your local plumbing supply
center where adapters are available for purchase.
WARNING!
please close the hydrant after using.
