GB-57
GB-56
ENGLISH
ENGLISH
ECO
(*EN
50242)
Pre-wash
Wash
Rinse
Drying
5/25 g
(1 or 2
pieces)
225
0.9
11
90 mins
Wash
Rinse
Rinse
Drying
30g
(1 piece) 90
1.35 12.5
Glass
Pre-wash
Wash
Rinse
Rinse
Drying
5/2 5g
(1 piece) 130
0.9
13
Rapid
Wash
Rinse
Rinse
20g
30
0.75 11
NOTE:
EN 50242:
This program is the test cycle. The
information for comparability test in accordance
with EN 50242.
Starting A Cycle Wash
1. Draw out the lower and upper basket,
load the dishes and push them back. It is
commended to load the lower basket first,
then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power
supply refer to last page "Product fiche".
Make sure that the water supply is turned on
to full pressure.
4. Close the door, press the Power button, to
switch on the machine.
5. Choose a program, the response light will
turn on. Then press the Start/Pause button,
the dishwasher will start its cycle.
Changing The Program Mid-cycle
A wash cycle can only be changed if it has
been running for a short time otherwise, the
detergent may have already been released and the
dishwasher may have already drained the wash
water. If this is the case, the dishwasher needs
to be reset and the detergent dispenser must
be refilled. To reset the dishwasher, follow the
instructions below:
1. Press the Start/Pause button to pause the
washing.
2. Press Program button for more than 3
seconds - the program will cancel.
3. Press the Program button to select the
desired program.
(45 °C)
(60 °C)
(65 °C)
(65 °C)
(40 °C)
(60 °C)
(45 °C)
(50 °C)
(55 °C)
