
Method 2
When the drain hose is connected to a separate riser 1,it must be ensured
that the connector 2 is air ght. Otherwise, it may cause odor leakage.
• The riser diameter shall be at least 40mm.
Connect to Water Supply Pipe and Power Supply
Connect the water inlet pipe to the faucet
The gasket shall be connected to the water inlet. Please use the new inlet pipe
a ached. In order to ensure the quality, all dishwashers have been injected
with water for tes ng before leaving the factory. Therefore, there may be
water in the dishwasher, which is a normal phenomenon.
Inlet connec on
1. The water supply pressure shall be between 30kPa and 1,000kPa.
2. Do not wear the thread when connec ng the water inlet pipe with the
valve.
3. If the water supply pressure exceeds 1,000kPa,please install a pressure
reducing device.
4. Turn on the faucet and check the connector for leakage.
5. Inspect pipes regularly, and change them if necessary.
6. Ensure that the pipes are not damaged or intertwined.
GB-15