manualshive.com logo in svg

FAR LV10C49M21W, Instruction Manual, Page: 67 / 73

Share
Download
FAR LV10C49M21W Instruction Manual Download Page 67

ENGLISH

GB-66

TROUBLESHOOTING TIPS

Before Calling For Service

Reviewing the charts on the following pages 

may save you from calling for service.

Problem

Possible Causes

What To Do

Dishwasher 

doesn’t start

Fuse blown, or the 

circuit break tripped.

Replace fuse or reset circuit breaker. 

Remove any other appliances sharing 

the same circuit with the dishwasher.

Power supply is not 

turned on.

Make sure the dishwasher is turned on 

and the door is closed securely.

Make sure the power cord is properly 

plugged into the wall socket.

Water pressure is low

Check that the water supply is 

connected properly and the water is 

turned on.

Door of dishwasher 

not properly closed.

Make sure to close the door properly 

and latch it.

 WARNING!

•  If overflow occurs, turn off the main water 

supply before calling a service.

•  If there is water in the base pan because of 

an overfill or small leak, the water should be 

removed before restarting the dishwasher.

Summary of Contents for LV10C49M21W










































































Reviews:

No comments