ENGLISH
ENGLISH
GB-11
GB-10
USE
•
is appliance is designed to operate in
ambient temperature between 16°C and 38°C.
If these temperatures are exceeded, i.e. colder
or warmer, the appliance will not operate
correctly. I h mbient temperatures are
exceeded for long periods, the temperature in
the freezer section will rise above -18°C and
food spoilage may occur.
•
Remove all packaging materials from the
appliance. Wash the inside of the cabinet with
lukewarm water and bicarbonate of soda (5
ml to 0.5 liter of water). Dry the appliance
thoroughly.
•
When you use the freezer for th rst time
or after defrosting, set the thermostat control
t h
aximum position for at least 2
hours before introducing food to be stored,
an he eadjust to the normal position.
•
If there is a power failure, do not open the
door. Frozen food should not be a ected
if the failure lasts for less than 12 hours. If
the failure is longer, then the food should
be checked and either eaten immediately or
cooked and then re-frozen.
SETTING THE THERMOSTAT KNOB
e refrigerator is controlled with a thermostat
knob located inside the fridge, towards the
upper right-hand corner. Turn the knob from
the STOP (OFF) position towards the higher
numbers for colder temperatures
e knob can
be adjusted from setting MIN, MED, MAX.
Higher settings on the knob (MAX) mean lower
temperatures (colder) in all compartments of the
appliance.
Allow at least 1 m of space at the top and
1 m of space on both sides of the appliance and
between the back of the appliance and the wall
for adequate air circulation
e appliance is not
designed for recessed installation (“building in”).
Install on a go
rm level surface, and any
unevenness of th oor should be corrected
prior to installation, slight unevenness can be
overcome by adjusting the front feet.
NOTE: If the appliance is positioned on a
carpet, sof oor covering you should readjust
the front feet once the appliance has had time to
settle.
