Page 14
There are 7 QE Sets plus the FLAT reference. Each EQ set filters and name can be
modified by the PC Speaker Control Software (SCS). The EQ Set selector does only
recall the stored preset. The factory default for all the 7 EQ Sets is FLAT. The 4 first
letters of the name of the selected EQ set are permanently displayed on the third field of
the bottom line of the LCD.
Figure 15: EQ Set selection parameter and possible values (factory default shown)
3.3.8
Speaker relative level
The speaker volume is the 8
th
menu item. It can range from -10dB to 0 dB by steps of
0.5 dB. The speaker relative level is meant to balance the acoustic power between
multiple speakers in a multi-channel system.
Figure 16: Relative speaker level parameter and values
3.3.9
Relative speaker delay
The speaker volume is the 9
th
menu item. It can range from 0 cm to 150 cm by steps of
5 cm. Speakers relative delay is meant to time align the speakers in a multi-channel
system.
Figure 17: Relative speaker delay parameter and values
3.3.10
Shelves and Tilts
The speaker features a low shelf filter, a high shelf filter and 3 tilt filters (parametric EQ
filters). The gain of these filters can be set from -3 dB to +3 dB by steps of 0.5 dB. The
corner frequency and Q or S factor can be modified by the SCS.
Summary of Contents for AV6.D
Page 2: ...Page 2...
