Far Tools 118015, Original Version Translation

Page: 26 / 104

EN
RECEIPT AND HANDLING
:
On receipt of your generator set, check that the equipment is in good condition
and that your order is complete. The generator should be handled with care and
no sudden movements, after preparing the area for its storage or use in advanc
e
.
EARTHING :
Earth the generator set each time it is used to prevent electrocution. For this purpo-
se, use a 10 mm2 copper wire attached to the generator’s earth connector and a
galvanised steel earth rod inserted 1 metre into the ground (equipment not sup-
plied with generator set). This earthing also dissipates the static electricity genera-
ted by electrical machinery.
DANGER: Never connect the generator set earthing wire to piping. In addition, the piping
is carrying flammable substances such as gas or fuel oil, there is always a risk of a fire
or explosion in the event of a short-circuit..
!
Never try to start the generator before carrying out the preparation as described in the
precedent section of the manual.
!
© FAR GROUP EUROPE
118015-Manual-D.indd 26 30/03/12 15:38:04