KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS
IMPORTANT INFORMATION FOR FUTURE REFERENCE.
Due to continuous product improvements, the pictures on this
manual may differ slightly from the actual product.
FAO
®
and FAO Schwarz
®
names and logos are trademarks or registered trademarks.
All rights reserved. www.fao.com
Distributed by and © 2021 MerchSource, LLC. Irvine, CA 92618.
For customer support please call 1-888-987-6533.
Printed in China
BLING TUNES HEADPHONES
6+
AGES
CHARGE
1. Insert the Micro USB end of the charging cable into the charging port.
2. Connect the other end to a USB port or a standard 5v USB adaptor.
3. Battery indicator LEDs will flash while charging headphones.
4. All 3 LEDs battery indicator lights turn off when the headphones are full charged.
POWER
ON – Press and hold the power button for 3 seconds. A sound will play indicating power is on.
OFF – press the and hold the power button for 3 seconds. A sound will play indicating power is off.
CONNECT
The headphones must be paired with a device or connected via auxiliary cable before operating.
Connect via Bluetooth
®
1. Make sure that Bluetooth
®
is enabled on your device.
2. Turn headphones on. Bluetooth
®
indicator will flash rapidly
3. On your device, select “FAO Bling” from the list of available Bluetooth
®
devices.
4. Once connected, the Bluetooth
®
indicator light will remain on.
5. To disconnect Bluetooth® and connect to another device, press and hold the play/pause button for 3 seconds.
The Bluetooth® LED indicator will begin to flash. You are now ready to connect to a different Bluetooth® enabled device.
Connect via Auxiliary port
1. Insert auxiliary cable (included) to your device.
2. Insert the other side of the cable to the auxiliary port of the headphones.
3. Turn headphones on.
CARE
• Spot clean only with a dry cloth.
• Store in a cool, dry location.
• Do not expose to extreme temperatures.
• Keep all straps clean.
size: 12 x 29.7 cm
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
PLAY
Access your favorite media on your device then
use the controls below.
Press to play/pause.
Press arrow keys to skip forward or
backwards on your playlist. Press and
hold to lower and raise volume.
Press to turn headphones on/off. Tone
will be heard after headphones are
turned on or off.
The
device
has
been
evaluated
to
meet
general
RF
exposure
requirement.
The
device
can
be
used
in
portable
exposure
condition
without
restriction.
Summary of Contents for BLING TUNES
Page 1: ......
