Call Mute
1. Press to Mute the microphone during the call.
2. Press again to un-mute the conversation.
Putting a call on hold
1. Press key or Hold soft key, caller is put on hold.
2. To retrieve the call press key or Resume soft key.
Note
: with more than one active call, select desired call with
the navigator keys and use the corresponding soft key to
hold or resume.
Screen icon
Packaging list
Keys features
IP Phone
Handset
Handset Cord
Stand
Power Adapter
(Optional)
Ethernet Cable
Quick Installation Guide
- 2 -
- 3 -
Wall Stand
(Buy separately)
Installation the device
Please follow the instructions in below picture to install the
device.
Bracket desktop installation
Wall mounting (Wall Stand need buy separately)
Connecting to the Device
Please connect power adapter, network, PC, handset, and
headset to the corresponding ports as described in below
picture.
①
USB port: connect USB device (USB flash drive, WiFi dongle).
②
Power port: connect the power adapter.
③
Network port: connecting local area network or Internet.
④
PC port: the network port connect to the computer.
⑤
Headset port: connect headset.
⑥
Handset port: connect IP Phone handset.
1. Press redial a call number.
Redial
3. Configure: Select network/Account etc, and fill the relevant
content.
4. Save the configuration.
Configuration via Web
1. Get the IP address from the phone: Press key, or Menu
> Status > ETH IP.
2. Loogin: Input the IP address in the web browser. The PC and
phone should be in the same IP address segment(The default
username and password are both ‘admin’.)
Language setting
1. Press Menu key > Basic > Language.
2. Select the desired language and press OK soft key.
Making a call
Accepting a call
1.
Pre-dialing
: enter the phone number and pick up the handset.
2.
Direct dialing
: lift the handset and enter the phone number.
3.
Handsfree
: enter phone number and press or vice versa.
4.
Headset
: enter phone number and press or vice versa.
1
.
Using the handset
: pick up the handset.
2
.
Using the headset
: press .
3
.
Using the handsfree
: press .
Configuration
Configuration via LCD menu of phone
1. Press Menu > System (Default password 123).
2. Select Network: To configure the Network Settings
(IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE).
3. Select Accounts: To configure enable the account, fill the
SIP server address, port, user name, password etc.
4. Save the configuration.
5.
Designated line
: press line key, enter phone number and
press dial key.
In hands-free mode
In headset mode
In handset mode
Mute activated
Silent mode
Call is on hold
Received call(s)
Auto-answering
activated
VPN activated
Disable do not
disturb (Blue)
Call forward activated
VLAN activated
SIP hotspot activated
Do not disturb
activated (Red)
Forward call(s)
Voice quality
level of call
New SMS
New VM messages
Keypad locked
Missed call(s)
Bluetooth device
paired connection
SMS
Dialed call(s)
Internet connected
Internet is disconnected
X
No IP address
!
Wireless network
connected
Wireless network
disconnected
Wireless network failure
Line keys
Soft keys
Message waiting indicator
Left and right navigation keys
Up navigation key, Shortcut to
call log
Down navigation key, Shortcut to
Status
OK key, Shortcut to Menu
Hold key, Hold/Resume the call
In idle mode or during ringing:
increase or decrease ringer volume
In communication:
increase or decrease earpiece,
headset or hands-free volume
Call transfer key
Conference key
Voice messages key
DSS Keys, It can be set as line key
/function key/speed dial key, etc.
Redial key, access to redial the last
record
In idle mode: activate/deactivate
silent mode
In communication mode: mute/
un-mute a call
Headset key, activate/deactivate
headset
Page-Jump key, It can switch the
vice screen DSS pages
Hand-free key, activate/deactivate
hands free
Long press to lock keypad.
Enter PIN to unlock keypad
(default 123)
Less than 2m
