Screen icon
Packaging list
Soft keys
Message waiting indicator
Left and right navigation keys
Up navigation key, Shortcut to call log
Down navigation key, Shortcut to Status
OK key, Shortcut to Menu
Hold key, Hold/Resume the call
Call transfer key
Conference key
Voice messages key
Keys features
IP Phone
Handset
Handset Cord
Stand
Power Adapter
(X1SP is optional)
Ethernet Cord
Quick Installation Guide
-
2
-
-
3
-
Configuration
Configuration via Phone
1. Press Menu > System (Default password 123)
2. Select Network: To configure the Network Settings
(IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE)
3. Select Accounts: To configure enable the account, fill the
SIP server address, port, user name, password etc.
Wall Stand
(Buy separately)
Phonebook key
Line keys
Headset key, Activate/deactivate Headset
Redial key, Access to redial the last record
In idle mode: ringer off
In communication mode: mute/un-mute a call
In idle mode or during ringing: increase or
decrease ringer volume
In communication: increase or decrease earpiece,
headset or hands-free volume
Hands-free key, Activate/deactivate hands free
Long press to lock keypad.
Enter PIN to unlock keypad
3. Configure: Select network/Account etc, and fill the relevant
content.
4. Save the configuration.
Configuration via Web
1. Get the IP address from the phone: Press key, or Menu
> Status > IPv4 / IPv6.
2. Login: Input the IP address in the web browser. The PC and
phone should be in the same IP address segment(The default
username and password are both ‘admin’.)
Language setting
1. Press Menu key > Settings > Basic Settings > Language.
2. Select the desired language and press OK soft key.
Making a call
1.
Pre-dialing
: enter the phone number and pick up the handset.
2.
Direct dialing
: lift the handset and enter the phone number.
3.
Handsfree
: enter phone number and press or vice versa.
4.
Headset:
enter phone number and press or vice versa.
5.
Designated line:
press line key, enter phone number and
press dial key.
Accepting a call
Putting a call on hold
3-party conference
1. Once in line with 1st caller, press key or Conf soft key,
1st caller is put on hold.
2. Then call the 2nd number.
3. After, 2nd call is established, press key or Conf soft key to
set up the conference.
1.
With the handset
: pick up the handset.
2.
With a headset
: press .
3.
With the handsfree
: press .
1. Press key or Hold soft key, caller is put on hold.
2. To retrieve the call press key or Resume soft key.
Note
: with more than one active call, select desired call with
the navigator keys and use the corresponding soft key to
hold or resume.
Installation the device
Please follow the instructions in below picture to install the
device.
Bracket desktop installation
Wall mounting (Wall Stand need buy separately)
Connecting to the Device
Please connect power adapter, network, PC, handset, and
headset to the corresponding ports as described in below
picture.
① Power port: connect the power adapter.
② Network port: connecting local area network or Internet.
③ PC port: the network port connect to the computer.
④ Headset port: connect headset.
⑤ Handset port: connect IP Phone handset.
5V
Internet
PC
Headset
Handset
Mute activated
Network storm
In handset mode
In headset mode
Forward call(s)
In hands-free mode
Call is on hold
Keypad locked
VPN activated
VLAN activated
Ringer off
Received call(s)
Missed call(s)
Dialed call(s)
Do not disturb activated
Call Forward activated
Auto-answering activated
SIP Hotspot activated
New VM Messages
New SMS
Voice Quality
Level of call
Internet connected
Internet is disconnected
X
No IP address
!