W611W User Manual
137 / 141
address 0.0.0.0; It can also be a network address similar to *.*.*.0, such as:
192.168.1.0.
Src Mask
Is the source address mask. When configured as 255.255.255.255, it
means that the host is specific. When set as 255.255.255.0, it means that a
network segment is filtered.
Dst Mask
Is the destination address mask. When configured as 255.255.255.255, it
means the specific host. When set as 255.255.255.0, it means that a
network segment is filtered.
After setting, click [
Add
] and a new item will be added in the firewall input rule, as shown in the figure
below:
Picture 147 - Firewall Input rule table
Then select and click the button [
Apply
].
In this way, when the device is running: ping 192.168.1.118, the packet cannot be sent to 192.168.1.118
because the output rule is forbidden. However, the other IP of the ping 192.168.1.0 network segment can still
receive the response packet from the destination host normally.
Picture 148 - Delete firewall rules
Select the list you want to delete and click [
Delete
] to delete the selected list.
12.35
Device Log >> Device Log
You can grab the device log, and when you encounter an abnormal problem, you can send the log to the
technician to locate the problem. See
