Icons
Description
Feature
Picture
Power
DC Power
Input port
Input Range:+12
～
+24V DC
(Notice: Plus-n-Minus connection of the Power)
WAN
WAN port
10M/100M Adaptive Ethernet port, connected to the
network
LAN
LAN Port
10M/100M Adaptive Ethernet port, connected to the
computer (which can be configured to routing mode, or to
bridge mode) or IPC camera.
NET
The
Network
Light
1
、
The network get through , and the light put out
2
、
The network can’t get through , and the light blink fast
within 0.5s
3
、
The network get through but registration fail , and the
light blink slowly with 1s
VOLUME
/RST
button
1
、
Press and hold volume down button
for 3
seconds; the door phone would report the IP address
by voice, and the voice volume will go down by single
press the button.
2
、
Long press the volume plus button
for 10
seconds, the speaker issued a rapid beep, and then
quickly press the three volume plus the button, beep
stopped. Wait 10 seconds, successfully switch to
dynamic IP after the system automatically voice
broadcast IP address. Switching again will become a
fixed IP address, and the voice volume will go up by
single press the button.
3
、
Press the reset button
for 3 seconds, the device
automatically restarts and restores the factory
configuration.
Interface Explanation
Interface Diagram
