3) External device connection diagram
Installation Diagram
4
Wall bracket (DIM:mm)
Model 1: Wall-mounted Installation
(CN:86 embedded box,US: single gang&Dual gang, EUR:80 embedded box)
Step 1: Install wall bracket
Without 86 embedded box in the wall
A. Mark two fixation holes positions on the wall with the wall bracket.
B. Take down the bracket, using an electric drill to make the two fixation holes on the
wall, then insert the two screw fixing seats provided.
C. Fix the wall bracket on the wall with two TA4*30 screws.
With 86 embedded box in the wall
A. Fix the wall bracket on the 86 embedded box with two PM4*16 screws.
Step 2: Connect peripherals
A. If you need to connect other input and output devices, please connect to the host
through the cable.
Step 3: Power on the device
If it is working properly, align the slot on the rear side of the panel with the pin on the
wall bracket and slide the host down to complete the installation.
Switch
Door Magnetic
Switch
WAN Port
Output Port
Output Port
Alarm light
Electric lock
Input Port
Input Port
Infrared Sensor
Vibration Sensor
Emergency Key
Or
Or
Or
