18
Picture 10 - Multicast Settings Page
Table 6 - MCAST Parameters on Web
Parameters
Description
Normal Call Priority
Define the priority of the active call, 1 is the highest
priority, 10 is the lowest.
Enable Page Priority
The voice call in progress shall take precedence over
all incoming paging calls.
Name
Listened multicast server name
Host: port
Listened multicast server’s multicast IP address and
port.
Multicast
：
Go to web page of [
Function Key
] >> [
Function Key
] , select the type to multicast,
set the multicast address, and select the codec.
Click Apply.
Set up the name, host and port of the receiving multicast on the web page of
[
Settings
] >> [
MCAST
].
Press the DSSKY of Multicast Key which you set.
Receive end will receive multicast call and play multicast automatically.
Dynamic multicast
：
Function description: send multicast configuration information through Sip Notify
signaling. After receiving the information, the device will be configured to perform
multicast monitoring in the system or cancel multicast monitoring in the system
