`
38 / 43
ZZZIDQYLOFRP
38
Remote DTMF
Trigger
By Duration
˖
Received the terminal equipment to send the DTMF password, if correct, which
triggers the corresponding output port (The Port level time change, By < Output
Duration> control)
By Calling State
˖
During the call, receive the terminal equipment to send the DTMF password, if
correct, which triggers the corresponding output port (The Port level time
change, by call state control, after the end of the call, port to return the default
state)
Remote SMS
Trigger
In the remote device or server to send instructions to ALERT=[instructions], if
correct, which triggers the corresponding output port
Call State
Trigger
The port output continuous time synchronization and trigger state changes,
including the trigger conditions: 1, call; 2, call and singing; 3, singing; three
models. (for example: the call trigger output port, will be in conversation state
continued to output the corresponding level)
Tamper Alarm Settings
Tamper Alarm
When the selection is enabled, the tamper detection enabled
Alarm
command
When detected someone tampering the equipment, will be sent alarm to the
corresponding server
Reset
command
When the equipment receives the command of reset from server, the
equipment will stop alarm
Reset Alerting
Status
Directly stop the alarm from equipment in the Webpage
Server Settings
Server
Address
Configure remote response server address (including remote response server
address and tamper alarm server address)
Summary of Contents for i18S
Page 21: ... 21 43 ZZZ IDQYLO FRP 21 ...
