Step 2: Connect the handset to the handset port by the handset cable in the
package.
Step 3: connect the power supply plug to the AC 5V adapter port on the back
of the phone. Use the power cable to connect the power supply to a standard
power outlet in your workspace.
Step 4: push the on/off switch on the back of the phone to the one side, then
the phone’s LCD screen displays “Initializing wait logon”. Later, a ready
screen typically displays the date, time.
If your LCD screen displays different information from the above, you need
refer to the next section “Initial setting” to set your network online mode.
If your VoIP phone registers into corporate IP telephony Server, your phone is
ready to use.
2.1.2
Power adaptor connection
Make sure that the power you use is comply with the parameters of power
adaptor.
1.
Plug power adaptor to power socket.
2.
Plug power adaptor’s DC output to the DC5V port of C58/C58P to start up.
3.
There will be displayed black line and “INITIALIZING” on the screen.
After finishing startup, phone will show greeting, current date and time and so
forth.
4.
If phone has registered to the server, you can place or answer calls.
2.2 Basic Initialization
C58/C58P is provided with a plenty of functions and parameters for
configuration. User needs some network and VoIP knowledge so that user
could understand the meanings of parameters. In order to make user use the
phone more easily and convenient, there are basic configurations introduced
which is mandatory to ensure phone calls.
2.2.1
Network settings
Make sure that network is connected already before setting network of phone.
C58/C58P uses DHCP to get WAN IP configurations, so phone could access to
