LAM
P
respondin
g to the European Re
g. n
. 24
4/2
009
EF
FIC
IEN
CY CLASS
C
120W
120W
HALOGEN FLOODLIGHT
62610 (150W,220-240V~50Hz)
62619 (150W,220-240V~50Hz)
INSTRUCTION
Important read these instructions before use
• This appliance is only suitable for faced mounting.
• The floodlighr may not be used on a mast(pole).
• Ensure that the mains voltage is switched off before mounting the halogen floodlight.
• Fix the appliance, out of reach (2.5 m). by 2 screws of minimum 6 mm and maximum 7 mm length.
• Respect a minimum distrance of 1 meter bebween the appliance and the object or surface with has to be
lightened (fig. 3).
• The lighting direction can not be adjusted to down ward.
• For applications on normal infiammable surfaces follow the instructions of fig. 2.
• Do not mount the projector on the caling.
• Use approved supply cable HO5RN-F 3G1.Omm
2
making sure that the grommet is used to ansure that the
housing remains waterproof.
• Connect the yellow/green conductor of the connection supply cable with the connection block, marked with
the earthings symbol (fig. 1).
Mount the other wires into the connector block. See marks N and L (fig. 1).
• When the halogen lamp has to be changed, switch off the mains voltage before opening the lid.
• Fix now the halogen lamp in the lampholder. Halogen lamps should not be touched with bare hands (fig. 5).
• Replace the cracked protection glass immediataly and use anly original parts to this.
• The halogen lamp in this fitting will burn through quickly if the fitting in fixed under an angle of more than 4°
(fig. 4).
• In doubt, consult a qualified election.
• Cracked protection glass: 133x92x4 mm cod. 62614.
MADE IN CHINA
IMT1013
Fig. 1
Fig. 2
Fig. 5
Fig. 3
Fig. 4
