Fantom VPW46H Owner'S Manual Download Page 5

This high pressure washer is suitable for 
non-professional use. The working 
temperature must range between 40°F 
and 120 °F. The machine is supplied with 
a trigger gun, equipped with a trigger 
handle to offer a comfortable working 
position.
The high pressure washer is suitable for 
washing with cold water only. The water 
that you use for the pressure washer 
must not be dirty, sandy or contain any 
corrosive chemical products.
The pressure washer may be used to 
wash shutters, doors, tiles, cars, decks, 
campers, etc., where high water pressure 
is necessary to remove dirt.
With the detergent tank, the pressure 
washer can be used to apply a thick 
coating of aerated detergent to the areas 
being cleaned .
When using the pressure washer we 
recommend the use of personal safety 
items to reduce the risk of accidental 
injury.

After you open the package, check to 
make sure that all the parts are in the box 
as per parts that are illustrated on page 3 
of this guide. Due to transport and 
packing restraints, some accessories 
may be supplied unassembled; in this 
case follow the assembly instructions in 
this manual. If you have any questions, 
call FANTOM customer service at 1-800-
798-7398. Keep all small and potentially 
harmful parts of the packaging (plastic 
bags, foamed polystyrene, nails, etc.) out 
of the reach of children.

Suitable Use of Your Pressure 

Washer

• Place the pressure washer in a safe 

area and on a horizontal surface.

• When using the pressure washer, 

hold the trigger gun firmly with one 
hand on the handle and the other on 
the lance. (Fig. 1)

Correct Use of the Pressure 

Washer

Fig. 1

NEVER 

point the water jet at electric 

wiring, at the pump unit, or at any 
person or animal.

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Unpacking Your Pressure Washer

Fig. 15

Using the Drain Snake With the 

Trigger Gun

The drain snake is used with the trigger 

gun to help clean blockages in 

sewer/waster piping by the use of a 

high pressure water jet and turbulence. 

Attach the drain snake onto the trigger 

gun nozzle and turn clockwise to lock 

as you would for the lances. (Fig. 16)

Fig. 16

WARNING

Use only on plastic schedule 40 pipe, 

minimum 4” diameter, ceramic pipe or 

cast iron pipe. 

NOT TO BE USED 

INDOORS. OUTDOOR USE ONLY.

CAUTION

Safety

Lock

When you wish to stop using the 

pressure washer temporarily, make sure 

that the safety lock has been engaged to 

avoid any accidental operation. (Fig. 12) 

Fig. 12

The angle of the water on the fan jet 

lance may be adjusted between 0° and 

60° by turning the nozzle adjuster 

counter-clockwise for a wider angle or 

clockwise for a narrower angle. (Fig. 13 & 

Fig. 14) Always make sure that the 

"On/Off' switch is in the "Off" position 

before changing the angle of the water 

jet. It is also recommended that the 

trigger gun safety lock be engaged as 

well. The adjustable fan jet lance allows 

you to use any variety of spray pattern 

from a full fan spray to a direct stream 

spray. When using the pressure washer 

to clean wood decks, siding, vehicles, 

etc., always start using the fan spray and 

begin spraying from a minimum 36" away 

to avoid damaging the surface of the 

material that you are cleaning. Always 

clear the area that you will be cleaning of 

people, pets and objects.

Fig. 13

Fig. 14

Counter-clockwise

Clockwise

Using the Adjustable Fan Jet lance

Do 

NOT

leave the drain snake 

unattended while connected to the 

pressure washer.

Using Detergent with the Pressure 

Washer

We recommend using the brush or the 

adjustable fan jet lance when you wish 

to use the detergent with your pressure 

washer. To use the adjustable fan jet 

lance, hold the lance in your hand and 

pull out the front part of the nozzle. (Fig. 

17)

Add detergent to the detergent tank and 

insert the feed tube into the detergent 

tank through the removable detergent 

tank lid. Make sure that the feed tube 

goes all the way to the bottom of the 

detergent tank.

If you do not need to use detergent, 

remove the feed tube from the 

detergent tank.

CAUTION

Introduce nozzle into pipe opening 

before pulling trigger. Do 

NOT

apply 

water pressure when drain snake is not 

in pipe. Whip effect may cause serious 

injury to operator or bystander.

Fig. 17

Pull Out

Using the High Pressure Lance

The high pressure lance is capable of 

cleaning most areas around the garden 

or on building work but using detergent is 

useful when cleaning automobiles or 

other painted finishes.

Using Brush With the Trigger Gun

The brush is used with the trigger gun. 

Push the brush onto the trigger gun 

nozzle and turn clockwise to lock as 

you would for the lances. (Fig. 15) the 

brush may be used for washing cars, 

boats, windows and other similar items. 

The brush operates at open orifice 

pressure so it will not direct a stream of 

water.

7

4

Reviews: